欢迎来到广东日月潭电源这个有限公司!

日月潭蓄电池容量怎样测量

  • 发布时间:2024-04-24
  • 发布者: admin
  • 来源: 本站
  • 阅读量:17

日月潭蓄电池容量怎样测量


用放电叉测量日月潭蓄电池电容量。放电叉是一支3V电压表和一个定值负载电阻并联装在一个带柄叉中的放电计,它只能检查日月潭 蓄电池的一个单格(2V)。检测时,将两针抵牢一个单格的正负电桩,在指针稳定的3~5s内迅速读出所指示的放电数值。指示在1.75V以上,说明该格完全符合标准;指示在1.75~1.5V之间,应当及时充电;指示在1.5V以下,说明日月潭 蓄电池有故障应予排除。

The capacity of Riyuetan battery was measured with discharge fork. The discharge fork is a 3V voltmeter and a constant load resistor installed in parallel in a fork with handle. It can only check a single cell (2V) of Riyuetan battery. During the detection, two pins are pressed against a single positive and negative electric pile, and the indicated discharge value is read out quickly within 3-5s when the pointer is stable. If the indication is more than 1.75v, it means that the grid fully meets the standard; if the indication is between 1.75v and 1.5V, the battery should be charged in time; if the indication is less than 1.5V, it means that the sun moon pool battery has faults and should be eliminated.

2.png



 


咨询热线
400-000-1581
QQ交谈

扫一扫